Hypertherm Powermax 85
  • Hypertherm Powermax 85
































      • Hypertherm® Powermax85® Air/Nitrogen Plasma Cutter has 200 - 600 V input voltage, 143 VDC output voltage and output current rating of 25 - 85 A. Plasma cutter with 1" recommended cutting capacity offering maximum pierce of 3/4" is used in hand cutting, gouging, automated cutting in X-Y table, track systems, pipe systems and robotic systems. Plasma cutter with 1 1/2" maximum severance includes a serial interface port, a CPC port, a selectable voltage ratio board, 180 deg machine torch and 25' leads. It offers optimum productivity and features a Smart Sense™ technology that sets the correct air pressure depending upon the torch length and operating mode. The straighter machine as well as the robotic torches offer great versatility, provide exceptional cut and gouge quality. It takes less time for grinding and edge preparation and wide voltage tolerance enhances the performance on motor generators and in-line low conditions. The Duramax™ torch renders high impact and heat-resistance and decreases the energy consumption with its high power efficiency. The SpringStart™ technology delivers uniform starting and produces fast cut speeds. It endures harsh working conditions and stimulates low maintenance, low operating cost for longevity. A gas inlet flow rate/pressure of 189 l/min at 5.6 bar is recommended for cutting and a gas inlet flow rate/pressure of 212 l/min at 0.8 bar is recommended for gouging. Cutter measuring 19.7" X 9.2" X 17.9" offers a duty cycle of 100% at 66 A, 230 - 600 V, 1/3 PH, 40% at 85 A, 200 - 208 V, 1 PH, 50% at 85 A, 200 - 208 V, 3 PH, 50% at 85 A, 240 V, 1 PH, 60% at 85 A, 230 - 600 V, 3 PH, 60% at 85 A, 480 V, 1 PH.