Hypertherm Powermax 65
  • Hypertherm Powermax 65
































      • Hypertherm® Powermax65® Plasma Cutter has 200 - 600 V input voltage, 139 VDC output voltage and output current rating of 20 - 65 A. Plasma cutter with 3/4" recommended cutting capacity offering maximum pierce of 5/8" is used in hand cutting, gouging, automated cutting in X-Y table, track systems, pipe systems and robotic systems. Plasma cutter with 1 1/4" maximum severance features a Smart Sense™ technology that sets the correct air pressure depending upon the torch length and operating mode. The straighter machine as well as the robotic torches offer great versatility, provide exceptional cut and gouge quality. It takes less time for grinding and edge preparation and wide voltage tolerance enhances the performance on motor generators and in-line low conditions. The Duramax™ torch renders high impact and heat-resistance and decreases the energy consumption with its high power efficiency. The enhanced shield decreases the dross build-up and permits smoother drag cutting for a better cut. The SpringStart™ technology delivers uniform starting and produces fast cut speeds. It endures harsh working conditions and stimulates low maintenance, low operating cost for longevity. A gas inlet flow rate/pressure of 189 l/min at 5.6 bar is recommended for cutting and a gas inlet flow rate/pressure of 212 l/min at 4.8 bar is recommended for gouging. Cutter measuring 19.7" X 9.2" X 17.9" offers a duty cycle of 100% at 46 A, 230 - 600 V, 1/3 PH, 40% at 65 A, 200 - 208 V, 1/3 PH and 50% at 65 A, 230 - 600 V, 1/3 PH.