• Powermax 45XP, Air, 45 Amps

• Powermax 65, Air, 65 Amps

• Powermax 85, Air, 85 Amps

3 Phase Only

• Powermax 105, Air, 105 Amps (208V)

• Powermax125, Air, 125 Amps (480V)

• Cutmaster A40 45XP, Air, 40 Amps

• Cutmaster A60, Air, 60 Amps

• Cutmaster A80, Air, 80 Amps

• Powermax 120, Air, 120 Amps

• Slim Linear Actuator Design (Increasing Cutting Area)

• 4.5" Standard Lifter Height (Optional 7" Lifter)

• Internal Wiring Harness Sub Assembly (For easy diagnosis and repair)

• Integrated Multi-Process Pneumatic Actuator Scribe and Marker

• Protective Front Enclosure (Covering linear components and Pneumatic cylinders)

• Rear Enclosure Protection (Covering Motor Reduction System)

• Enclosed Cable Carrier (Assisting with management of collision detection wiring and pneumatic hoses)

• Scribe & Marker Release Date July 2021 (Available only for Arc PRO Automation Professional Software Package)

Z-AXIS FULLY INTEGRATED MULTI-PROCESS

MODULAR WELDMENT FRAME DESIGN

• Modular Weldment Assembly Frame Design (Expandable For Growth)

• Rigid Design To Counteract Vibrations and Inertia 

• Dropped Side Rail Design for 3 Side Material Loading

• 6" Deep Water Pan

• Recessed Transfer Rollers On All 4 Sides (For Material Loading)

• 4" Diameter Leveling Feet With Rubber Pads (3/4-11 Thread)

• Machined gear rack mounting surface (Easily replaceable)

• Extended Frame Along Y-Axis For Gantry Parking Zone

• Removable / Replaceable Slat Holders 

• 225 Degree Pivoting Pedestal Arm Rotation

• 360 Degree Monitor Rotation & 10 inch Height Adjustment   (Allowing for Easy Screen Viewing Angles and Ergonomic Screen Placement)

• Full Enclosures With Easy Wire Harness Routing 

• Wiring Harness Protection and Consolidation

• Hidden 3 Receptacle Power strip 

• Integrated Emergency Stop and Torch ON/OFF 

Computer Station & Pedestal Option

COLLISION DETECTION HEAD-ASSEMBLY 

• 2 Axis Squaring For Torch Setup (Referred To In Hypertherm Manual)

• Dual Collision Proximity Sensors (Allowing For Program Stop Within 2 Degrees Out Of Alignment)

• Front Floating Proximity Sensor (Secondary Touch Off Option If Ohmic Fails To Sense Material)

• Indexing Cones Design (Provides Torch  Relocating of True Position)

• Unique Hexagon Geometry (Unlike Competitors Our Collision Detection Head Is Designed And Manufactured By Squickmon's in the USA)

• Integrated Positive Z-Axis Homing (No Material Loading Required For Homing)

TABLE CONSTRUCTION AND SIZE OPTIONS 

• Machined .625" T6 6061 Aluminum Gantry Side Plates

• Hiwin Style Linear Rail System Across X & Y-Axis with Recirculating Ball Bearing Cassettes (Creating Smooth Linear Motion)

• 2" Slat Offset (Helps with Tipped parts when Cutting)

• 4.5" Gantry Clearance (Beneficial When Cutting Large Part profiles, Beams, and Tubing)

• 16g Steel Gantry Enclosure Protection (Guards Motors And Reduction Assemblies From Impact)

• Adjustment for Gantry Squaring and Homing Switch Positions

• 12g Steel Modular Weldment Assembly (Extremely Rigid and Expandable)

• All Elihu Lite Series Systems are Sized To Fit A Standard Sheet Width Relative To Their Designated Machine Size Plus 1-2" Oversized For Cutting Area (Example a 4x8 Machine has a minimum of 49"x97" Cutting Area)